NOVELL TECHNICAL INFORMATION DOCUMENT TITLE: REV B Upgrade for MHS V1.5P DOCUMENT ID: TID000422 DOCUMENT REVISION: A DATE: 01JUL93 ALERT STATUS: Yellow INFORMATION TYPE: Symptom Solution README FOR: V15B_P.EXE NOVELL PRODUCT and VERSION: NetWare MHS 1.5 ABSTRACT: The self-extracting file, V15B_P.EXE, upgrades MHS v1.5p to MHS v1.5p revision B. This file fixes the problem of gateways regenerating the Send-to header. The file also compares extended addresses for uniqueness, and supports password encryption. _________________________________________________________________ DISCLAIMER THE ORIGIN OF THIS INFORMATION MAY BE INTERNAL OR EXTERNAL TO NOVELL. NOVELL MAKES EVERY EFFORT WITHIN ITS MEANS TO VERIFY THIS INFORMATION. HOWEVER, THE INFORMATION PROVIDED IN THIS DOCUMENT IS FOR YOUR INFORMATION ONLY. NOVELL MAKES NO EXPLICIT OR IMPLIED CLAIMS TO THE VALIDITY OF THIS INFORMATION. _________________________________________________________________ Self-Extracting File Name: V15B_P.EXE Files Included Size Date Time \ V15B_P.TXT (This File.) UPGRADE.EXE 22227 01-07-92 11:42a SYS.EXE 298740 09-17-93 1:41a UPGRADE.EXE 22227 01-07-92 11:42a EXE.EXE 206612 09-17-93 1:39a RELEASE NOTE NetWare(R) MHS(tm) Personal Edition ----------------------------------- Software v1.5P Revision B ------------------------- The NetWare MHS Personal edition software uses the Standard Message Format (SMF) to provide DOS-based messaging services on personal computers. NetWare MHS transfers information containing addresses, text, and other data from an MHS-compatible application or gateway to applications and gateways at other locations. MHS uses a store-and-forward communications method, which transports messages across a broad range of data-communications networks. The NetWare MHS Personal edition stores messages and forwards them to other locations or applications. Other applications provide services - such as electronic mail - that allow users to create and process messages. NetWare MHS v1.5 incorporates new features and an improved user interface for installation and administration, and it uses a revised version of the Standard Message Format (SMF) for exchanging electronic messages. If you need connectivity between NetWare MHS and CompuServe, either to use the CompuServe hub service, or to send mail from MHS to CompuServe subscribers, obtain the MHS 1.5 upgrade option from CompuServe. If you have a CompuServe subscription you can obtain it by signing on to CompuServe and entering "GO MHS" at the CompuServe Main Menu screen. For more information, call CompuServe at 800-848-8199 or 614-457-0802. Please read this entire release note and Chapter 2 of the NetWare MHS Installation and Operations Guide before installing the NetWare MHS software. If you have any questions or comments, please contact: Customer Support Response Center Novell, Inc. 2180 Fortune Drive San Jose, CA 95131 If you need information about the Novell mail hub (NHUB) or about registering your workgroup, call the Messaging Hotline at the following number: (408) 473-8989 To register your workgroup, you can send an MHS mail message to hubadmin@NHUB. In the message, include your workgroup name, your contact phone number, and the name of the contact person in your organization. If you need technical support, call one of the following numbers: (800) NETWARE (801)429-5588 For other information, send a fax to the attention of the MHS Product Manager at the following number: (408) 433-0775 Components ---------- The NetWare v1.5P Rev. B upgrade consists of these components: o Files contained in UPGRADE subdirectory, to perform the upgrade. o EXE and SYS subdirectories, which are invoked by the UPGRADE program (do not execute them). o V15B_P.TXT, this release note. System Requirements ------------------- NetWare MHS Rev. B (Personal edition) requires the following hardware and software: o NetWare MHS v1.5P Rev. A NetWare MHS v1.5 Rev. B has the same hardware requirements as NetWare MHS v1.5 Rev. A. ***************************************************************** * Warning * * * *A small number of third-party utility programs change internal * *MHS configuration information and queue headers contained in * *NETMGR.QUE. NetWare MHS does not support these changes; they * *will cause an unrecoverable error when you run NetWare MHS v1.5* *Rev. B. Contact the manufacturer of your MHS utility, to find* *out if your utility is supported. If it is not, please remove * *it from your system before you upgrade to NetWare MHS v1.5 Rev.* *B. * ***************************************************************** NetWare MHS v1.5 Rev. B Compatibility ------------------------------------- NetWare MHS v1.5 Rev. B is fully compatible with NetWare v1.5 Rev. A, v1.5C, and v1.1. It is not compatible with third-party MHS utilities that make unsupported changes to NETMGR.QUE. Upgrading from NetWare MHS V1.5 ------------------------------- To upgrade your current version of NetWare MHS to NetWare MHS v1.5P Rev. B, follow these steps: 1. Make sure that MHS has delivered all pending mail. 2. Back up the existing SYS, MAIL and EXE subdirectories. 3. Set the MV environment parameter to point to the path containing the MHS subdirectory. For example, if NetWare MHS is installed in SERVER1/SYS:MAIL, enter the command "SET MV=SERVER1/SYS:MAIL". 4. Change to the directory containing the UPGRADE.EXE program, and run the Upgrade program by typing: UPGRADE The Upgrade program prompts, 'Would you like to view the README file (Y/N)?' 5. To display the README file, type "Y". If you have already read the README file, type "N". The Upgrade program prompts, 'Confirm that the path to the MHS files is the one you wish to upgrade (path). Is it OK to continue (Y/N)?' 6. Type "Y" if the path displayed in the prompt is the path containing the MHS files and programs. The Upgrade program upgrades your NetWare MHS installation to Revision B. Type "N" if the path is incorrect. The Upgrade program terminates. Set the MV environment parameter, and begin again at step 4. Documentation Corrections ------------------------- This section provides updates and corrections to the NetWare MHS Installation and Operation Guide. Passwords for Asynchronously-Connected Hosts -------------------------------------------- The NetWare Installation and Operation Guide incorrectly describes how to define passwords for hosts with which you communicate asynchronously. You can define a Password for access to hubs in the MHS HOST SETUP form. This is the password that the local host transmits when it communicates with a remote host. (It transmits the same password to all the remote hosts with which it communicates.) For each remote host the local host calls, and for each remote host that calls the local host, you can define a Password (in the "A HOST THAT THIS HOST PHONES" and the "A HOST THAT PHONES THIS HOST" forms, respectively). This Password must match the password defined in the Password for access to hubs field in the remote host's HOST SETUP form. If you do not define the remote host's password at your local host, MHS will take the password transmitted by the remote host in the next communication session, and write it in the Password field. Once a password has been assigned to a remote host, the remote host administrator must notify you of changes to the password. When the remote administrator changes the password in the Password for access to hubs field, the local administrator must change the Password field in the "A HOST THAT THIS HOST PHONES" or the "A HOST THAT PHONES THIS HOST" form for the remote host. Otherwise, if Require Password is set to "Yes," a password mismatch will occur, and the hosts will be unable to establish a communication session. Similarly, when you change the password in the Password for access to hubs field, you must ask the administrator of the remote host to update the Password in the form for your host. To understand how passwords work, consider "Eng," a host that calls another host named "Sales." Sales has chosen "salpas" as its Password for access to hubs, and Eng has chosen "engpas" as its Password for access to hubs. These passwords are defined in the HOST SETUP form. The administrators at Sales and Eng can get together and coordinate passwords. Sales' administrator enters "engpas" in the Password field of the "A HOST THAT THIS HOST PHONES" form that defines the route to Eng. And Eng's administrator enters "salpas" in the Password field of the "A HOST THAT PHONES THIS HOST" form that defines the route to Sales. Both administrators can also set Require Password to Yes. One or both administrators can choose not to define the password for the other host. If they leave the Password for the remote host blank, MHS will insert the password it receives during the next communication session. During this session, Eng's MHS transmits its password. Sales' MHS enters the password received from Eng in its routing table, and send its password to Eng's MHS. Eng's MHS enters the Sales password in its routing table, and continues the transmission. From now on, if either administrator changes its Password for access to hubs, they must ask the other administrator to change the Password field in the "A HOST THAT THIS HOST PHONES" or "A HOST THAT PHONES THIS HOST" form for the remote host. 96V32 and 96V32HUB Modem Driver ------------------------------- The 96V32 and 96V32HUB are not drivers for the Hayes Smartmodem, as stated in the NetWare MHS Installation and Operation Guide. They are drivers for the Hayes V-series ULTRA modem. Features of NetWare MHS v1.5 Rev. B ----------------------------------- NetWare MHS v1.5P Rev. B incorporates the following new and revised features: o Improved Monochrome Support. Several new command-line switches have been added for use with monochrome monitors. They are the following: -M Disables color on IBM PS/2s and monochrome VGA displays. -R Displays the currently selected item in reverse video on laptops that do not display bold text. -U Displays the currently selected item as underlined text on laptops that do not display bold text. The -M, -R and -U switches are mutually exclusive. To display selected attributes in reverse video, use the command MHS -R. o Faster "Copy a List" Processing. The "Copy a list to a file" process is faster. o Retry Counter Reset. The Retry Counter resets after a successful connection to another host. o Support for Modems That Use One Stop Bit. To support new modems with software UARTs that use only one stop bit for communication, NetWare MHS uses only one stop bit. It also supports modem definitions with large command sets. o Support for Additional Modem Drivers. In addition to the modem drivers listed in Appendix C of the NetWare MHS Installation and Operation Guide, NetWare MHS now supports the following modem drivers. 2400B For Hayes Smartmodem 2400 and Hayes-compatible modems operating at 2400 baud. Use for calling hosts. 2400B For Hayes Smartmodem 2400 and Hayes-compatible modems operating at 2400 baud. Use for both hubs and calling hosts. 96V32 For Hayes V-Series ULTRA 9600 modems. Use for calling hosts. 96V32HUB For Hayes V-Series ULTRA 9600 modems. Use for both hubs and calling hosts. BULLET96 For E-Tech BulletModem E9696M modems without MNP. BULLETEC For E-Tech BulletModem E9696M modems with MNP. DISABLED To disable asynchronous activity. For hosts that do not exchange messages with remote hosts through telephone calls. FAXMDM For generic SendFax-compatible modems. HAYESMAN For Hayes-compatible modems that require telephone numbers to be dialed manually. HAYES-UN For Hayes-compatible modems operating at speeds up to 2400 baud. Use for both hubs and calling hosts. HAYESX24 For generic Hayes-compatible 2400 baud modems. HAYESSM For Hayes Smartmodem 2400 modems. HSTD-HUB For US Robotics COURIER HST modems with MNP. Use for both hubs and calling hosts. HSTDNMNP For US Robotics COURIER HST modems without MNP. INTELFAX For the Intel SatisFAXtion board. INTELV32 For Intel 9600EX modems. MICROCOM For Microcom QX4232HS modems. NULLMDM For hosts with a direct cable connection between their communication ports. You can use NULLMDM as a platform for developing modem-control files. PP96-HUB For Practical Peripherals PM9600SA modems. Use for both hubs and calling hosts. This list supersedes the one in Appendix C of the NetWare MHS Installation and Operation Guide. Note: If you want to use one of these modem drivers, refer to the MODEM.DOC file in the SYS directory for installation instructions. o SMFUTIL.DOC Updated. The online documentation for SMFSEND is more thorough. o SEND-TO Support. When an SMF version 70 gateway delivers a message to MHS, MHS will not regenerate the SEND-TO field if a valid SEND-TO field exists. o Support for Extended Addresses. While MHS v1.5 Rev. B does not use extended address to route messages, it now examines extended address elements in braces ({ }) when checking for duplicate addresses. For example, a message contains the following addresses: mail@fax {FAX: 1-408-555-1212} mail@fax {FAX: 1-408-555-1211} Previously, MHS would compare only the base address (mail@fax). Since the base address is the same in both instances, MHS v1.5 would only deliver one message, containing the first address, to the fax gateway. MHS 1.5 Rev. B recognizes the two addresses as distinct, and delivers two copies to the fax gateway. Note that MHS does not interpret the contents of the braces; it only knows they are different. Thus, if in the above example, the addresses were: mail@fax {FAX: 1-(408)-555-1212} mail@fax {FAX: 1-408-555-1212} then MHS would send two copies. This change supersedes the information in the SMF Programmer's Reference. General Restrictions -------------------- The following general restrictions apply to networks running NetWare MHS v1.5: o Monochrome Monitor Problems. The MHS screens may be difficult or impossible to read on certain VGA monochrome monitors. If you experience this problem, use the following MODE command at the DOS prompt before running MHS: MODE=bw80 o Color Monitor Problems. If the colors on an application display incorrectly after you run MHS, use the following MODE command at the DOS prompt before running your application: MODE=co80 o Default Primary Host. In new installations, the default primary host for non-routing internet hosts is NHUB. If you do not change this, no mail will be delivered to or routed from the non-routing host. o Inaccurate Estimated Transfer Time. MHS attempts to estimate the amount of time an asynchronous transfer will take. It often estimates incorrectly, especially for high-speed modems. o Memory Allocation Error. If the NetWare MHS workstation has a limited amount of available memory, and a large number of files accumulate in the SND directory, a memory allocation error will occur. Delete any *.BAD files in the SND directory and, if possible, terminate memory-resident programs sharing the MHS workstation. Do not run MHS from a shell. Trademarks ---------- Novell, the N design, and NetWare are registered trademarks and NetWare MHS is a trademark of Novell, Inc. CompuServe is a registered trademark of CompuServe, Inc. Da Vinci Systems is a registered trademark of Da Vinci Systems Corp. E9696M and BulletModem are trademarks of E-Tech, Inc. Hayes and V-series are registered trademarks and ULTRA and Smartmodem are trademarks of Hayes Microcomputer Products, Inc. Intel is a registered trademark and SatisFAXtion is a trademark of Intel Corporation. Microcom and MNP are registered trademarks of Microcom, Inc. Practical Peripherals is a registered trademark and PM9600SA is a trademark of Practical Peripherals, Inc. USRobotics is a registered trademark and COURIER, HST, and ASL are trademarks of U.S. Robotics, Inc. ÿ